squish

英 [skwɪʃ]

美 [skwɪʃ]

v.  (被)压坏，挤坏; 发吧唧声; 发吱嘎声

过去分词：squished　过去式：squished　现在分词：squishing　第三人称单数：squishes　

BNC.48495 / COCA.19433

牛津词典

verb

• （被）压坏，挤坏
  if sth soft squishes or is squished , it is crushed out of shape when it is pressed
• 发吧唧声；发吱嘎声
  to make a soft wet sucking sound

英英释义

noun

• the noise of soft mud being walked on

verb

• put (a liquid) into a container or another place by means of a squirting action
• walk through mud or mire
  1. We had to splosh across the wet meadow
  Synonym:squelchsplashsploshsloshslop

双语例句

• The air motion in UCS combustion system is much stronger than that in base combustion system and the strong reversed squish lasts longer in the former than in the latter because the former has a far larger squish area than the latter.
  伞帘喷雾燃烧系统的挤气面积远大于原机，因此前者的空气运动明显强于后者，较强逆挤流维持的时间长于后者。
• The effect of swirl strength on particulate emission at medium speed operating condition was not significant because the squish and expansion swirl generated by piston movement could meet the needs of fuel combustion.
  中速工况气缸内形成的挤气涡流和膨胀涡流基本可以满足燃料燃烧的需求，涡流强度在一定范围内的变化对降低柴油机排气微粒贡献不大。
• It'll help squish out all that water I've been retaining.
  它能帮我把我一直保持的水份全都挤出来。
• By comparison, straight wall chamber ( type A) is easy to be manufactured, has the lowest thermal stress and has obvious squish. Type A is the best combustion room choice.
  比较而言，直壁ω型燃烧室最易制造，热应力较小，挤流作用明显，为最佳燃烧室方案。
• Reversed squish is mainly concentrated at edge of combustion chamber bowl.
  反喷或逆挤流主要集中在燃烧室边缘上。
• In fact, if Christ himself stood in my way, I like Nietzche, would not hesitate to squish him like a worm.
  实际上，就算是耶稣基督本人挡住了我的路，我也会和尼采一样，毫不犹豫地像踩死一只虫子一样击倒他。
• A complete electric resistance furnace with all-fibred, double top of furnace, high emissive coating, protective enhancement coating, directive emission-enhancement heating elements, automatic furnace door squish mechanism and movable shroud was obtained, and its structural characteristic and energy saving theory was discussed.
  介绍了采用全纤维、双炉台、高发射率涂料、保护增强涂料、定向增强辐射加热元件、自动炉门压紧机构、移动罩式等技术制造的节能电阻炉的结构特点和节能原理。
• As the small and medium sized high-speed direct injection diesel engine needs strong intake swirl, squish compression and combustion turbulence, its intake port generally made spiral or tangential shape.
  对于中小型高速直喷式柴油机，因其需要较强的进气涡流、压缩挤流和燃烧紊流，其进气道一般做成螺旋的或切向的形状。
• It shows that the squish flow velocity decreases and the reverse flow velocity increases as cylinder heat transfer and cylinder gas leakage increase.
  本文还导出了考虑散热和活塞环漏气影响的轴向挤流速度和逆喷速度的解析关系式，该式表明散热和活塞环漏气使轴向挤流速度减小，逆喷速度增加。
• Study on Combustion Chamber Squish Velocity and Heat Release in a Moped 2-stroke Engine
  二冲程汽油机燃烧室挤流和放热规律的研究