shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- Compared with the other shrinkages of hydraulic mass concrete, temperature shrinkage is the most prominent.
在水工大体积混凝土中，温度收缩是其主要的收缩。 - The shrinkages of juvenile wood are higher than that of mature wood.
而幼龄材全缩率高于成熟材。 - The shrinkages of the different composition zinc matrix alloys were measured by the self made linear shrinkage measurer.
对模具用不同配比的锌基合金进行了收缩率的测定。 - Using simulation experiment, shrinkages of injection molding parts with different thickness are studied. Simulation experiments are performed with same parameter of process condition and fixed gate dimension and position.
采用模拟实验的方法，在相同注射工艺条件下，保持浇口尺寸和位置不变，对不同厚度制品的成型收缩率进行模拟实验研究，绘制了模拟实验曲线。 - The shrinkages in water and dry of the complex polymer fibers are tested through a great deal of experiments. The shrinkage behaviours of the composite PBT/ PET fibers are analysed by means of linear regression method.
通过大量试验研究了复合聚酯纤维的沸水和干热收缩规律，并利用线性回归方法讨论了热收缩速率的变化规律。 - The influences of initial temperatures and the sizes of clusters on the coalescence were revealed by calculating the shrinkages and aspect ratios and by tracking the snapshots of the system configures.
通过对并合体系的收缩因子、纵横比率计算，以及体系构型的跟踪记录，揭示了团簇的初始温度和团簇的尺寸对并合过程影响的一般规律。 - The relationship of relative humidity and autogenous shrinkages of reactive powder concrete ( with compressive strength of 200 MPa) with ages were investigated detailed.
通过试验研究了抗压强度为200MPa的活性粉末混凝土在水化过程中内部相对湿度及其自收缩随龄期的变化规律； - On the basis of temperature field numeric emulating and combining with dynamic dividing technology of melting pool isolated region, this article used G/ r~ ( 1/ 2) method to predict possible shrinkages and dispersed shrinkages that may appear in solidification process.
在一般铸件温度场数值模拟的基础上，采用G/R~（1/2）法并结合熔池孤立域的动态划分技术对凝固过程中可能出现的缩松缩孔进行了数值模拟； - The full sintered Y-TZP had excellent mechanical properties, with bending strength of 710 MPa, fracture toughness of 4.77 MPa · m 1/ 2. During full sintering process, the shrinkages of dental crown in different spatial dimensions were equality and uniformity.
完全烧结的陶瓷材料机械性能优良，弯曲强度达到710MPa，断裂韧性达到4.77MPa·m1/2。在完全烧结过程中，各个方向收缩均匀一致。 - The design of a vertical die casting machine rotor is most important to improve the quality of the rotor, traditional rotor castings have many shrinkages such as dispersed organization, bad compaction degree, large blowholes.
电机转子立式压铸机压铸模具的设计制造是保证电机转子品质至关重要的环节，传统工艺生产的电机转子铸件存在着组织疏松、密实度差、气孔多而大等缺陷，影响着电机的各种态势性能；