short-circuiting

英 [ˌʃɔːt ˈsɜːkɪtɪŋ]

美 [ˌʃɔːrt ˈsɜːrkɪtɪŋ]

v.  (使)短路; (做事)抄近路，走捷径
short-circuit的现在分词

柯林斯词典

• V-ERG (使)短路
  If an electrical deviceshort-circuitsor if someone or somethingshort-circuitsit, a wrong connection or damaged wire causes electricity to travel along the wrong route and damage the device.
  1. Carbon dust and oil build up in large motors and cause them to short-circuit...
     碳尘和燃油在大发动机里越积越多，造成了发动机短路。
  2. Once inside they short-circuited the electronic security.
     一旦置入，它们就会使电子安全设施短路。
  3. Short-circuitis also a noun.
     
  4. The fire was started by an electrical short-circuit.
     火灾是由电线短路引发的。
• VERB 回避，绕过（某一流程或程序)
  If someone or somethingshort-circuitsa process or system, they avoid long or difficult parts of it and use a quicker, more direct method to achieve their aim.
  1. The approach was intended to short-circuit normal complaints procedures.
     这种方法旨在避开正常的投诉程序。

双语例句

• The control of CO 2 arc welding short-circuiting transfer with magnetic field is studied.
  研究了外加磁场对CO2焊短路过渡的控制。
• Short-circuiting Effect and the Solution in Gnutella Network
  Gnutella网络中的短路效应及其解决方案
• The CO2 welding process needs the special external characteristic and dynamic characteristic of power source for there are alternately arcing time and short circuiting time at the period of short-circuiting CO2 welding.
  在采用短路过渡方式的CO2焊过程中，短路和燃弧过程交替发生，因此它对电源的外特性和动特性有特殊的要求。
• According to the analysis we can get the result of the welding quality from the current and voltage of the CO_2 gas shield droplet short-circuiting transfer.
  在此基础上，采用本系统对熔滴短路过渡CO2气体保护焊的焊接电流和电压波形进行了实时采集、存储。
• Analysis of synchronous multi-information and experimental research of short-circuiting transfer process in CO 2 arc welding
  CO2焊短路过渡过程的同步多信息分析及试验
• The direct current reactor is used in order to obtain favorable dynamic property and attain the request of short-circuiting transfer to welding power supply, which makes the welding machine obtain excellent welding performance.
  为获得良好的动特性，达到短路过渡对焊接电源的要求，加入了直流电抗器，从而使焊机具有良好的动特性，获得优良的焊接工艺性能。
• The rule of the arc-time and short-circuiting transfer cycle time under the high speed welding was researched by welding quality analyzer of Hannover.
  采用汉诺威焊接质量分析仪，研究了在高速焊接的情况下，燃弧时间与短路过渡周期的变化规律。
• Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding.
  短路过渡焊接时，熔滴过渡频率通常被作为评价焊接过程稳定性及焊接质量的重要指标。
• The Finnish phone maker has received around 100 reports of its phones short-circuiting while being charged.
  芬兰手机制造商已经收到大约100份由于手机短路而被起诉的报告。
• The effects of the short-circuiting transfer parameters on weld formation quality in high speed CO2 welding process were analyzed.
  分析了高速CO2焊接过程中短路过渡参数对焊缝成形质量的影响。